Cablet M.2 NVMe/NGFF SSD Enclosure USB 3.1 Gen2 10Gbps for 2242/2260/2280 M-Key/M+B Key PCIe SSD, Supports Dual Protocol NVMe and NGFF SSD, UASP Max 2TB, Aluminium Case

Great product,comes with a screwdriver, and usb a to c and usb c to c cable, all accessories screws are provided. excellent quality metal construction which also helps dissipate heat,speeds as advised. Excellent heat transfer, i have put in a 1TB WD SN770 one of the fastest and hottest running drives on the market in the enclosure,the metal case helps in dissipating a lot of heat the case gets really hot but takes away the heat from the drive itself,for games like msfs with online data streaming and data being written to continuously plus constant reads the case helps in keeps the drive functional and comparatively cool while already a lot of heat is being transferred and dissipated into the operating environment by the case only advice for seller would be please include another heatsink so that there is no gap between the case top one side and the thermal pad that is provided that way even better heat transfer. Overall heat transfer is good anyways there since the bottom of ssd directly touches metal surface and transfers heat outside.Temp in sustained transfers hovers around 62*C in humid,hot conditions of mumbai. In cold conditions or interior parts of india with less humidy temps would be even lower.My drive maxes it out at 1000 mbps peak transfer read write as advertised on a usb c 3.1 superspeed port on my laptop,same speeds on thunderbolt enabled usb-c port aswell.cheaper than orico and performs the same.

Good built with aluminum body and small in size. Speed also very good. Cable is nice with usb 3.0 extension.

Haven't tried any nvme SSD only tried sata SSD m.2. it works fine. Heats up during data transfer so has the cooling pad given in the box. To be used as instructed. Easy to install. Quality is sturdy.

No issues till now, good metallic body

The media could not be loaded. I am writing this review because I was so happy and satisfied when I received this product...The manufaturer has done such a fabulas job with the packaging, product and Accessories and all.The Quality is superb, honeslty i didn't expect this for the given price.I bought it to clone my current (C-Drive) so that I can upgrade my current M.2 SATA SSD to M.2 NVME SSD (WD SN570). The cloning was done in under 12 min (102GB). Blazing FAST.....!!The box also includes 2 high speed cables, note these cables are not your ordinary cables, some supplier just put low Quality cables in the box that resuts in poor performance but the cables provided in this box are Blue Tip high speed 10GBps connectors. Two cables included Type-C to Type-C and Type-C to Type-ABonus!! - you also get a cute key chain & a screwdriver.This is hands down the best M.2 NVME/SATA CASE & Accessories i have found on Amazon.other brands are selling plastic trash on Amazon for laughably high prices don't waste your money guys I would buy this over them any day.worth every penny, would give 10 Stars if I could.

Previously order Pi SSD enclosure but my NGFF M.2 SSD was not compatible with that but this one is working great and speed is also good.Installation was easy and look is also good. Keychain is cherry on the cake.Great product

Value for money. If you are planning to buy this, don't hesitate; just buy it. You will not regret it.

This looks nice in design, but otherwise has serious overheating issues. I'd recommend you avoid it. When writing data to my WD_Black SN770 SSD, the temperature increased, which is normal. But after having written the data (i.e. when it was idle since I wasn't reading any data from it either), the temperature just kept increasing and reached 75 degrees. It was increasing still. So, I disconnected fearing that it might damage my SSD.It is understandable for the SSD to get heated while writing to it, but heating it more than 75 degrees when idle is not right. Maybe I just got a faulty piece. But I couldn't return/replace it since this item was non-returnable. Maybe the seller had set it as "non-returnable" since this must've been getting a lot.Then I checked online to see if I can apply for warranty since it says that it has 1 year warranty. To my surprise, I couldn't find any service center of Cablet. Meaning, 1 year warranty is just a gimmick to fool the buyers. Now, I'm stuck with this product, which was an utter wastage of money.I'd recommend to go with other popular high quality brands like Orico, PiBox etc. Surprisingly, PiBox has worked well for me. Even though their enclosures aren't that well designed, but they work well functionality-wise. Their support is also great and comes with 1 year warranty.Update: Avoid PiBox too since their 1 year warranty is also a gimmick. They have a support which you can't call but only WhatsApp or email. And when you either WhatsApp or email it's support, they just ignore you.