Deliver to KUWAIT

For best experience Get the App

ChgImpossMetric & Imperial & US Screw Gauge SAE Whitworth 55 Degree & Metrisch 60 Degree Thread Pitch Gauge for Industrial Measurement

ChgImpossMetric & Imperial & US Screw Gauge SAE Whitworth 55 Degree & Metrisch 60 Degree Thread Pitch Gauge for Industrial Measurement

Q: What are the center 8,10,11,14,19 and 28 blades denominated in?

Threads per inch. Those are the Whitworth blades, ie the 55˚ ones. To translate, since they word things a bit oddly: SAE/Imperial is measured in TPI, with a 60˚ thread angle. ie your 8-32 x 1" type screws. Whitworth/American/US is measured in TPI, and is basically the same as SAE except with a 55˚ thread angle and rouded crests. Metric is measured in the distance from thread to thread (the thread pitch), with a 60˚ thread angle. These are for your ISO screws. ie M4 course, M6 fine, etc.

Q: Is this small enough to measure female thread sizes?

I don't have mine handy right now. but I think you can measure the inside thread pitch down to about 5/16", and 8mm. I haven't used mine yet, but the stampings on the individual blades don't appear very clear.

Q: How are the gauge findings used for purchasing a screw ( an initial search doesn't find such details listed in screw descriptions on store sites ) ?

You will need to use this tool in conjunction with a chart showing the common SAE and Metric bolt/screw sizes. This tool will determine the number of threads per inch or mm. You will also need the diameter of your fastener before heading to the store. For instance the common threads for a SAE 1/4” coarse bolt is 20 TPI (threads per inch) - while a 1/4” fine bolt has 28 TPI. This set is for external threads. You keep comparing the various thread gauges in the set until you match your fastener - use that information along with the diameter of your fastener to make the final determination. The last bit of information you need would be the length of the fastener and the type of head. So a common 1/4” SAE bolt that is 2” long would be described as 1/4”-20 X 2.

Q: One side is marked Whitworth and the other is marked Metrisch, but nothing points to which end is which.

One says "Metrisch" which is German for Metric. These have numbers in tenths or hundredths marked on each tong. The other side is standard (American) and have whole numbers on each tong, along with a "G". There's a middle section which are Whitworth threads - those are same threads per inch as Standard, but each tooth has a 55° angle (as apposed to the 60 degree on the teeth of the other thread types).

4.4/5

Product ID: 375227355

Secure Transaction

📏58 precision blades

🔒Secure lock-up device

⚙️Dual 55° & 60° thread angles

Frequently Bought Together

ChgImposs Metric & Imperial & US Screw Gauge SAE Whitworth 55 Degree & Metric 60 Degree & & US 60 Degree Thread Pitch Gauge for Industrial Measurement

JoblikeBrez Thread Checker, 30 Nut and Bolt Thread Checker, Bolt Size and Thread Gauge 15 Standard & 15 Metric, Bolt Size Finder, Wall-Mountable Bolt Thread Identifier Gauge with Inch & CM Ruler

Screw Thread Gauge | Metric and SAE | Recommends Drill Bit & Tap Size (BCP675)

Description

⚙️ Nail every thread pitch like a pro — don’t get left behind!

COMPACT POWERHOUSE - Lightweight and portable design fits perfectly in any professional toolkit
DUAL ANGLE EXPERTISE - Supports both 55° Whitworth & 60° Metric thread pitches for industrial-grade checks
PRECISION ENGINEERED - 58 stainless steel blades with wire-drawn finish resist rust and ensure accuracy
LOCK LOAD CONFIDENCE - Integrated lock-up device guarantees stable, reliable measurements every time
UNIVERSAL THREAD MASTERY - Covers Metric, Imperial & US standards for ultimate versatility

This premium screw pitch gauge features 58 stainless steel blades covering Metric, Imperial, and US thread sizes with dual 55° and 60° angles. Equipped with a lock-up device and rust-resistant finish, it ensures precise, reliable thread measurement for industrial and metalworking professionals.

Specifications

Item Weight	1 g
Package Dimensions	7.19 x 3.71 x 1.4 cm; 1 g
Manufacturer reference	EPC_MEA_000

Have a Question? See What Others Asked

What are the center 8,10,11,14,19 and 28 blades denominated in?

Is this small enough to measure female thread sizes?

How are the gauge findings used for purchasing a screw ( an initial search doesn't find such details listed in screw descriptions on store sites ) ?

One side is marked Whitworth and the other is marked Metrisch, but nothing points to which end is which.

Reviews

4.4

All from verified purchases

S**I

average item

quality is not good , just like disposable item.

16.12.2019

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Imran F.

Very reliable shop with genuine products. Will definitely buy again!

2 weeks ago

Yusuf A.

Fantastic experience overall. Will recommend to friends and family.

1 month ago

View all Trustpilot reviews

Shop Global, Save with Desertcart

Value for Money

Competitive prices on a vast range of products

Shop Globally

Serving over 300 million shoppers across more than 200 countries

Enhanced Protection

Trusted payment options loved by worldwide shoppers

Customer Assurance

Trusted payment options loved by worldwide shoppers.

Desertcart App

Shop on the go, anytime, anywhere.

KD 6.38

Duties & taxes incl.

KUWAITstore

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Meera L.

Smooth transaction and product arrived in perfect condition.

3 weeks ago

Farhan Q.

The delivery time was excellent, and the packaging was secure.

2 months ago

View all Trustpilot reviews

DOWNLOAD THE APP

WE SOURCE ITEMS FROM

UAE
UK
INDIA
USA
JAPAN

Customer Services

About Us

Customer Support