VHTSP731 Real Red Brake Caliper Paint Can - 11 oz.

Painted the brake calipers on my 2018 WRX in lapis blue pearl after replacing the rotors and pads. I wanted something different from the standard bronze so went with gold. Plenty of paint in one bottle to do multiple coats on all 4 corners, providing excellent coverage. Adheres and works well and sprays evenly. Seems to be very durable and scratch resistant, as the calipers still look great after several months. Very easy to use and apply.

Like any painter will tell you, prep is 90% of the work. Your parts gotta be clean clean clean. Remove the rust, remove the grease, as clean as you can get it. Degreaser, Brake Cleaner, Acetone, throw all you've got at it!! Since most calipers and parts are cast iron, you gotta get down in those crevasses and divots. Scuff with a Scotch-brite and wipe down again. My final wipe was done with a 23% IPA solution to get any residue from the cleaners off. So I did all of that as best I could, but it wasn't perfect and I have some fisheyes in places, but they look great from 5 feet away!Before I started painting I turned my oven on at 200 degrees. I painted the parts in 3 coats, 10 minutes between. After the painting was done I hung them in the oven for 2 hours (directions say 1) then turned the oven off and let everything cool. After an hour they were cool enough to handle. And I'm really impressed with the hardness of the paint and I think it's going to be very durable. Pealing off the tape I could tell how hard the paint got and it was kind of like a shell.

I was iffy about doing this to my car, but I decided I’m on vacation so I might as well get it done because I’m not paying somebody for something I can do to my car myself no matter what it is if I can do it I’m doing it I’ll buy the parts and do it myself and I love the results Great color. The paint quality is amazing. It looks good. It worked very well. I recommend this to any and everyone this is a 10 out of 10 and still holding up four months later because I did this a while ago now. So for anyone who wants to do some type of project on their car or their truck, you can do it just like I did

I was able to do 4 calipers with one can of paint 3 coats each as directed. Definitely do prep work before (sand them down the best you can with some medium grit sand paper). Come out a lot better than I expected. Also I definitely suggest the clear coat too that made them shine nice. See before and after pics, they honestly look brand new in person after.

This review is for the Gloss Clear (wish amazon would state this automatically for these multi item vendor pages). Edit: Apparently I have only one option of one review since they were from the same page. Seriously amazon, fix this for your consumers!One star dropped because no where on the clear can does it say clear. If you lose your cap then you have to test it if you also bought other VHT spray paints and have them capless nearby.The clear scared me more than I ever want to be scared again. Brand new 3k brake package and go to put a clear coat on and I got a milky look on a relatively light coat. I was tempted to grab my brake cleaner and scrub the days work I had on them. I'm glad I waited. At first I was letting them air dry. I need to wait for spacers so due to that there's no rush. I then did a test (1st pic). I sprayed one pad clip which gets milky easily. The paint under that is a dark orange (not the gold in the other two pics). I put it on a towel on the dashboard of my truck and let the sun bake it for a few minutes. I live in southwest FL so it was baked quick. The glaze was great and the milky look was gone.Some things don't get a good gloss layer, even with many heavy coats. Pics one and two are shinier than they appear. Gold really has a hard time showing that in pictures. The gold however took 5 - 7 coats before I was barely happy with the results. The VHT Red is more glossy as is without clear than the Gold is with my end result.My process was much more than most have stated, but due to trying to get the best and be sure it was cured.1st I primed two coats.2nd I painted 4 coats. 1st light and others thereafter were medium and heavy with no runs.3rd I was going to wait it out, so they sat for four days.4th My decals came in (I used an Infiniti set, akebono set for the a and underline, and a custom set I ordered online). I'm a ham and it's my hard work and paycheck so decided to get some laughs.5th I sprayed 5 - 7 coats of this clear. After each coat I put them on a towel in my truck and sun baked them. They got almost too hot to handle and I have very calloused hands.6th After work I took them home and baked them at 200° for 1 hour.7th I smiled and am writing this review as they lay next to me so I can appreciate the tender loving care I put into this!The 4th pic is the gold without the clear. The room I'm in is incredible hot and humid. I had to buy a 3rd can because the end of the first started spraying what seemed like sand and was MUCH darker than the rest. 2nd can did the same only half way through. I then researched it and it was actually said to be something that happens in very low humidity so I did the 3rd outside in the shade with no issue. My own learning experience so won't knock off stars for my conditions during the painting. You can see the slight grittyness under the last two coats. At this point having stripped them from a past color change and being near the end of my third can I was happy to move forward.Best of luck with your project. Hope this helps.