🔧 Upgrade Your Ride with Ease!
The Metra95-5812 Double DIN Installation Kit is expertly designed to fit a variety of Ford vehicles from 2004 to 2019. Made from durable ABS plastic, this kit ensures a seamless, factory-like appearance for your aftermarket radio. It includes all necessary brackets and hardware, along with detailed installation instructions, and offers tech support for any installation queries. Weighing just 5 ounces, it's lightweight yet robust, making it the perfect choice for your vehicle upgrade.
Item Weight | 5 ounces |
Product Dimensions | 15.2 x 1.5 x 7.5 inches |
Country of Origin | USA |
Item model number | 95-5812 |
Is Discontinued By Manufacturer | No |
Wireless Remote | No |
Warranty | 1 year |
Weight | 0.31 Pounds |
C**Z
Perfecto,se ajusta a la descripción del producto
Aunque no los llegué a usar porque los devolví, quiero decir que si se ajustaban a mi necesidad, lo que luego de tenerlos y presentarlos dónde lo Hiba a colocar tomé la decisión de no ponerlos porque el estereo que había comprado era de pésima calidad y decidí comprar otro de mejor calidad que ya este marco no era necesario pero si lo recomiendo, se ven de un exelente plástico, con un buen acabado y con instrucciones de ensamble
T**X
Nice
Sent back wrong vehicle
6**N
Easy to install on aftermarket radios
For perfectly in my 2004 mercury Monterey van! Easy to install functions perfectly!
R**.
Good mounting options, but instructions are basic
Upon assembly of the bracket and attachment to radio, I was not sure that this would fit my 2006 F350 SD. I ended up having to do a little trimming to fit buttons and knobs on my chosen radio. I also had to remove the bottom mounting tabs on the frame, flush with the vertical sides of the frame, as they interfered with HVAC and powerpoint mounting bosses on the truck trim panel. After this, all fit well!
K**R
it fit
worked fine on my 2009 f550
V**R
Not a good choice for a 2008 explorer.
This review is strictly for a 2008 Ford Explorer, the product may be perfectly suitable for other vehicles.I've used Metra dash kits for many years now, and have always been pleased with their quality and finish. In this case, I am very disappointed. This kit is for both single and double DIN installations. I am installing a double DIN enonon G2104 head unit. It is clear they tried to make this one product work for a wide array of vehicles. As such there are modifications which are required to make this kit work with your specific vehicle. I'll try to describe each issue.1. The dash kit when properly assembled just doesn't fit properly into the dash opening. There are gaps between my dash trim, and this install kit's face plate. There is absolutely no way to correct or fix this.2. The kit requires you to cut tabs off of the kit for the explorer installation. You'll need to not only cut off the tabs, but sand down the bracket where the cut was made.3. For the explorer install spacers are included and required. The spacers are problematic. They should snap in place, but they are too loose, and tend to fall out as you are attempting to secure the kit to the dash.4. The face plate requires you to recess your radio into the dash. The kit's face place sits on top of your head units face plate, and pushes your head unit backward into the dash recessing it. Now this doesn't sound bad until you see it installed, it looks like a hack rather than a clean installation. If you have a deep head unit, you may even have issues getting it to fit in.5. Because the face plate covers over the head units face plate, units with controls near the edge will be blocked by this kit's face plate. On my unit, the USB port, SD card slot, infrared window, and a few other items we inaccessible with this kit. Also if you have knobs, the kit may not fit at all. The knobs on my unit are close to the edge, and since the kit needs to cover a bit of the units face plate, the knobs wouldn't even fit through the opening in the kit. If you have a motorized front face, there is no way this kit will work. Rather than covering the head unit's front face, they should have made the kit to allow the head unit's bezel to pop through the kits face plate.6. Be wary of using the included screws, they are very long, and may interfere with the functioning of your head unit. You would be better off getting shorter screws.Overall I am seriously disappointed with this kit and would not recommend it for a 4th gen explorer installation.
D**T
Works perfectly but,
The instructions are extremely vague and you need to have a bit of common sense and some wit to you to figure out how to install this and have it become usable. It is a "one size fits most" type of product so you should be aware of this. I had to cut some of it to make it fit in my Ford Econoline dash. I also needed to round out a hole to fit a screw on the side of the unit. The instructions tell you to install the unit and then wire it, just don't. Common sense will tell you to wire it and then install it. Little things like that will make you scratch your head and wonder who wrote this and how am I suppose to do that? but other than that. It does the job intended and it works just fine.
O**A
Buena calidad 👌🏻
Excelente 👌🏻
Trustpilot
3 days ago
1 month ago