Deliver to KUWAIT

For best experience Get the App

Statorade Electric Bike Hub Motor Cooling Ferrofluid (10 Ml)

Statorade Electric Bike Hub Motor Cooling Ferrofluid (10 Ml)

Q: for the xiaomi m365 pro where to apply that exactly ? between each magnet ? to seal motor casing with clear silicon is fine ? it escape from bearing ?

In general, the Statorade will naturally settle on the magnets once the motor spins for a short while. Sealing the casing with silicone should be fine, but I cannot speak to how well that motor is sealed. Please keep in mind that Statorade is not to be used with geared motors, as it will only serve to trap heat inside the motor. I was not able to find information online whether or not the Xiaomi M365 Pro is direct drive or geared, so use at your own discretion.

Q: again fot the m365 pro do we need to replace or add more with time ferrofluid or we do that 1 time is for life ? is possible it go to short electronic

As long as it is a direct drive motor and the motor side plates are sealed, then about 4mL should be sufficient for a small hub like that and you only need to add it once for life. If you don't have a good side cover seal though, then it could leak out over time and require replacing.

Q: Can i get the statorade out of the motor? i don’t know if my motor is an inrunner or outrunner😔

Yes, it's very easy to clean it out with an absorbent cloth or paper towel. But if you have the motor open to either add or remove Statorade from magnets, you can also see very clearly what style of motor you have too! The only ones where it will have a significant cooling effect our direct drive outrunner motors.

Q: Will this work with a qs v3 5000w motor. here is the amazon link https://www.amazon.com/5000w-highest-torque-windings-motor/dp/b06y5nld1l/ref=sr_1_3?c

Yes it will, any direct drive hub. Add Hubsinks to get the full effect though. If the motor casing can’t shed the extra heat Statorade transfers from the core, it won’t do much good.

Product ID: 42456284

Secure Transaction

Details

Brand
Grin
Voltage
12 Volts
Material
magnetite
Item Weight
1.6 Ounces
Shaft Diameter
2 Millimeters

⚡40% power boost

💧5-8mL needed

🔧2mm nozzle precision

Frequently Bought Together

Grin Technologies Statorade Electric Bike Hub Motor Cooling Ferrofluid (10 Ml)

HubSink V2 E-Bike Hub Motor Heatsink for Improved Cooling and Performance (QS205)

Description

🚴‍♂️ Ride the Future: Keep it Cool, Keep it Powerful!

UNLEASH THE POWER - Boost your motor's continuous power capability by up to 40% without overheating.
COOL UNDER PRESSURE - Enhance your hub motor's performance while keeping it cool and efficient.
EFFORTLESS APPLICATION - Includes a Luer Lock syringe for mess-free injection into tiny 2mm holes.
GAME CHANGER FOR E BIKES - Transform your ride with cutting-edge ferrofluid technology.
MINIMAL DRAG MAXIMUM FLOW - Just 5-8mL of Statorade doubles heat flow efficiency with negligible drag increase.

Grin Technologies' Statorade Electric Bike Hub Motor Cooling Ferrofluid is a revolutionary 10mL solution designed to enhance the cooling efficiency of direct drive hub motors. By injecting just 5-8mL of this advanced ferrofluid, users can significantly increase their motor's continuous power capability by up to 40% while maintaining optimal performance and minimal drag.

Have a Question? See What Others Asked

for the xiaomi m365 pro where to apply that exactly ? between each magnet ? to seal motor casing with clear silicon is fine ? it escape from bearing ?

again fot the m365 pro do we need to replace or add more with time ferrofluid or we do that 1 time is for life ? is possible it go to short electronic

Can i get the statorade out of the motor? i don’t know if my motor is an inrunner or outrunner😔

Will this work with a qs v3 5000w motor. here is the amazon link https://www.amazon.com/5000w-highest-torque-windings-motor/dp/b06y5nld1l/ref=sr_1_3?c

Reviews

J**H

Makes a big difference!

I used this along with heat sinks on my Graffiti X e-bike. No overheating. The motor runs much cooler. Strongly recommend.

26.08.2025

D**G

Really reduces temp and noise no added load

This stuff is amazing works better than expected the only issue I didn’t think of was resealing the hub motor but well worth it

21.06.2025

B**R

Helium3 for your direct drive motor!

This ferrojuice is the business! It’s absolutely essential for any hub motor. I noticed a significant temp drop during long rides and I can tell the motor is happy. Purchase a tube of clear silicon caulk to seal up circumference of motor casing on both sides to ensure this magic fluid doesnt leak out!

16.07.2024

L**S

Pushing my 1,500w to 5,500w with no issues now!

My scooter was limited to 13mph originally. I slapped a Flipsky VESC 75200 pro V2 on IT and I hit 40 before overheating. I added 6ml of Statorade between the stator’s and the magnet’s and now I’m going 63mph with no heat issues at all! This is a must for every hub motor and Grin Technologies makes a lot of other amazing products too.

13.05.2024

K**N

Great stuff but no tip included

The package was open on both ends and the tip must have fallen out. Wasn't in the mailed plastic bag either. Kind of a pain to apply without the tip but managable.

27.05.2022

#**O

Lowered hub temps

Diy ebike I built, 84v fully charged, running 45 amps so almost 3800w. On longer full throttle rides or up significant hills the rear hub would get pretty hot. Ordered this and no longer needed to worry about slowing down to let hub cool. Overall very satisfied with results. Hub still gets warm but not hot like before.

12.06.2024

W**S

Best ferrofluid for ebike motors

Used it on a 5000W and 3000W ebike rear hub motor. Works very well.

8.04.2025

K**R

What I needed

Works as expected it was easy to install watch video on grin technologies, it's a must to keep motor cool.

8.12.2023

Common Questions

Are the products genuine and authentic?+

Yes, all products are sourced directly from authorized retailers in the US, UK, UAE and India. We maintain strict quality control processes and verify each product before shipping. All items come with applicable manufacturer warranties and are covered by our standard return policy.

How long does delivery take and is it reliable?+

Delivery times vary by destination country, typically ranging from 3-9 business days. Each order is fully trackable through our system. We handle all customs clearance and use reliable courier partners for last-mile delivery. You'll receive regular updates about your order status via email and our app.

What is Desertcart? Is it safe to order from?+

Desertcart is an international e-commerce platform operating since 2014. We securely process thousands of orders globally each day. Every product goes through our quality verification process before delivery, and we provide end-to-end order tracking, 24/7 customer support, and a comprehensive returns policy to ensure a safe shopping experience.

How is product pricing calculated?+

Our prices include the product cost, international shipping, import duties, customs clearance, and local delivery charges. We handle all customs and import procedures, ensuring there are no hidden fees upon delivery. PRO members receive additional benefits including free shipping.

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Fatima A.

Best international shipping I've ever tried. Worth every penny!

3 days ago

Reema J.

Perfect platform for hard-to-find items. Delivery was prompt.

1 month ago

View all Trustpilot reviews

Shop Global, Save with Desertcart

Value for Money

Competitive prices on a vast range of products