🚀 Elevate Your Automation Game!
The UCTRONICS DC 12V Programmable Time Delay Relay Module is a robust and versatile solution for automating various projects. With a durable metal enclosure, it features 18 programmable modes, a delay time range from 0.1 seconds to 270 hours, and the ability to save settings automatically. Perfect for automotive modifications, Raspberry Pi projects, and industrial controls, this relay module is designed to handle high loads while ensuring safety and reliability.
Connector Type | Screw Terminals |
Contact Material | Silver |
Contact Type | Normally Open |
Current Rating | 10 Amps |
Mounting Type | Surface Mount |
Brand | UCTRONICS |
Operation Mode | Automatic |
Wattage | 2.8E+2 |
Coil Voltage | 12 Volts |
Contact Current Rating | 10 Amps |
Maximum Switching Current | 10 Amps |
Maximum Switching Voltage | 12 Volts |
Minimum Switching Voltage | 12 Volts |
Operating Time | 2.7E+2 Hours |
Specification Met | Ma |
Item Weight | 2.39 ounces |
Package Dimensions | 4.02 x 3.07 x 1.69 inches |
Color | with Metal Enclosure |
Manufacturer | UCTRONICS |
ASIN | B097GLMDM3 |
Country of Origin | China |
Date First Available | June 18, 2021 |
P**L
Inexpensive and reliable
Oh man, this thing is the best device I bought for my subaru crosstrek, simple to set up (thanks to a YouTube video) and now my car doesn't shut off every time I come to a stop. Been using it for 5 years.
W**P
Exactly what I need for Auto Engine Start Stop disable project
Was looking for a programmable delay relay control board that was triggered by 12VDC power application. This unit is perfect. Has a little confusing instructions to set the proper relay board mode, but was able to figure it out with a bit of trial and error. Basically is connected to my vehicles 12VDC and when the board sees power it counts down 7 seconds (time is programmable) and the “closes” the normally open side of the relay for 1 (also programmable) which emulates an Auto start/stop switch manual button press. This is required as you cannot just short accross the same manual switch as this vehicle has internal programming that requires that Auto start stop switch to be “open” when the car is started. Placing the “normally open” side of the relay across this switch emulates an “open” switch at car start and then after a 7 second delay “closes” the “normally open” side of the relay which emulates the Auto start/stop button press. And it does not alter the function of the Auto start/stop button. If you want to turn on the Auto start/stop function, all you need to do is press the Auto start/stop button a second time manually. I do want to add that this worked well for my particular vehicle model but may not be suitable or safe to use for your model vehicle. Incompatibility or improper installation could damage your vehicle and void your vehicle’s warranty. Please do not alter your vehicle’s electrical system or wiring if you don’t have proper electrical/electronics training and understand basic electrical safety practices. But for my project it was just what I needed.
L**Z
Got it to work with dc in and out. Finally
The media could not be loaded. Needed a timed delay to start my wideband after my ignition started. Got it working. Love itI just hope it handles some vibrations from my 69 mustang
A**R
Perfect solution for a delayed switch
I am using this product to delay the turn on of my car audio amplifier to a set time after the car is turned on due to the charging system. Functionally this works perfectly.I did have minor confusion while setting up as my original intention was to have the DC in always powered and use my remote (ignition source) as the trigger. It turns out this is not a possible configuration and I had to power the device directly off my remote. In my case my remote is able to supply the required current, but in other situations it may not.My primary gripe is that the case is not easy to install. The holes do not line up well, and I ended up giving up and just using the base without the cover. It at least provides some protection and provides integrated standoffs, though it certainly does not look as clean. Perhaps in the future I'll modify the holes so it fits.
A**A
Imagine the possibilities.
This is a rock solid good quality product. This was the perfect solution to rig up a solution to trigger remote entry on a door buzzer system. (Hint: connect power supply to an Homekit enabled plug, and activate by voice from anywhere in the world... ) The relay design is reassuring -- fail safe. If power fails, it's going to physically click back. Think through all failure scenarios to be power safe, this kind of physical relay is key. Instructions may not be the clearest, but it can do lots of modes.
G**A
Great multi function timer after learning how to program
Read the setup procedure below to understand how to program this timer.However, after learning how to program it, I ran it through 111,000 cycles with 2 seconds on and 2 seconds off. It worked beautifully and never missed a beat. I had it connected to a relay control board so it would turn the relays on for 2 seconds then they'd be off for 2 seconds then back on for 2 seconds and so on. Over 100,000 cycles without a failure. Not bad, especially considering the price.The instructions that come with it are limited. Here is another explanation of how to program this timer.1st.....To set up the timer...Press and Hold the SET button... this puts it into program modeTo Select the functionQuick presses of the Set button will step through the four functions. The function selected is indicated by the small blue LED just to the right of the readout. These functions are:MO... When this light is illuminated you can select the Mode. you select 1-18 (see the instruction sheet that came with the timerT1 ... When this light is illuminated you can set the time for T1T2 ... When this light is illuminated you can set the time for T2NX ... When this light is illuminated you can set the multiplier for the time of T1 and T2MO - the MODE OF THE TIMER. Set to between 1 and 18 based on how you want the timer to work.See the instruction sheet that came with the timer for a limited explanation of the modes. It's best toexperiment with a couple before choosing a final ModeT1 - FIRST TIME PERIOD DELAY. Based on the mode selected, this is the delay from first receiving the input trigger pulse until the second action T2, happens. Look at the graphs provided with the timer for further explanations. Make sure you understand what happens at power up compared to the what happens when the trigger pulse is applied.T2 - SECOND TIME PERIOD DELAY. Based on the mode selected, this is triggered by the completion of the T1 delay and in some modes reapplication of the trigger. T2 determines the delay until the next action happens.NX - NUMBER MULTIPLIER. Used to set the values of T1 and T2 to greater than 9999 seconds. The default value of NX is 0101. To determine the actual time delay, T1 is multiplied by the left two digits of NX. The resulting value is the delay in seconds used by timer.. Similarly, the right two digits of NX are the multiplier for T2. As an example, imagine T1 = 2000, T2 = 4000, and NX = 0105. Then the actual time delay would be 2,000 seconds (2000 x 01) for T1 and 20,000 (4000 x 05) for T2. A setting of NX to zero appears to do nothing.
T**P
Just what I needed!
I purchased this in hopes to work with one of my Halloween animatronics. The animatronic was a motion activated only unit. I was trying to get it to just continuously play its motion but it did not have this feature. I purchased this product along with a mono 3.5 mm auxiliary cord and a 12 volt DC power adapter and wired it all in together. I chose the fifth setting on this unit and then timed out how many seconds I needed for the animatronic to go through its motion and reset and then programmed that into this unit and it works flawlessly. This is just what I needed for one of my Halloween displays to work automatically without a motion sensor.
Trustpilot
1 month ago
1 month ago